• Baseload and Load Trakker systems used to maintain a preset minimum load on lightly-loaded diesel generators, to improve engine performance
  
  
• Constant current control, for battery discharge testing
  
  
• Re-generative power control used to monitor the power circuit of crane motors operating on a diesel generator and to apply load as required, to absorb re-gen power
  
  
• Nimbus MV monitor - used to display data from MV systems. 

  The MV monitor allows real time graph and data capture by a low voltage and current signal reference connecting direct to the MV switchboard or generator. This system allows accurate data capture, avoiding losses associated with step-down transformers and load cables.

  • Working voltage range 380V to 25kV
    
    
  • Accurate and real data capture
    
    
  • Use with the PC system full report printing

Standard control systems include:

• Simple manual control by selector switches mounted on the loadbank
  
  
• KCS control, a pcb-mounted thumbwheel / push-button system with local or remote manual control terminals used for straightforward load testing.

  The Crestchic KCS allows loads to be stepped in 1kW/1kVA steps.

  • Simple to use 
    
    
  • Basic operation 
    
    
• Hand Held Terminal
  
  
  • Allows load steps down to 1kW/kVA 
    
    
  • Controls Resistive/Inductive loadbanks or any combination 
    
    
  • Fully adjustable lagging power factors from 0.0 to 1.0 
    
    
  • Manual load control by selecting kVA and power factor
    
    
  • Automatic load control giving twenty independent load settings of kW, kVA, or amps, Power Factor and time
    
    
  • Load correction with learn feature to allow for volt drop
    

• Simulator and pre-programmable practice tool
  
  
• Manual load is selected by simple sliders allowing fully variable Power Factor
  
  
• Automatic load control gives the ability to create flexible and variable test profiles, which can be saved and run at a later date 
  
  
• Load expressed as percent of supply or actual load
  
  
• Motor load ('M' load) automatically calculated
  
  
• Test program editor supports load ramping (load applied gradually over the time entered); automatic data capture as load change is performed; easy verification of test program from within the editor with single stepping
  
  
• Ability to add notes and customer annotations to reports 
  
  
• All recorded data can be saved to disk 

Contact the rentals or sales teams
email: hires@crestchic.co.uk
email: sales@crestchic.co.uk
Whatever your specification, the Crestchic teams will have the loadbank solution for you.